Please Note: Due to contractual obligations, ARO products are sold by Liquid Handling Systems only in Southern California. If you are located outside of the Southern California Area, contact ARO at Tel: (419) 636-4242, or FAX (419) 633-1674 for an authorized distributor near you. Thank you.

Features
Patented, "Unstallable", Stall-Free Air Motor Design Bolted Construction for a Safe, Sure-Fit Seal against Material Leaks. Ice-Free Air Motor Design Sealless Design avoids costly pump tear-down. ISO 9001 - Registered CE - Compliant 5 - Year Warranty
	Non-Metallic Constructed Pumps
	Port Sizes (Max. Flows): 1/4"(4.5 GPM), 1/2"(13 GPM), 1"(40 GPM), 1-1/2" (100 GPM), 2" (145 GPM)

PUMP MATERIAL CHOICES ( Note: Not all pump models contain every material listed. Consult I-R/ARO or Catalog for specific trimmings.) BODY: Conductive Acetal (Patented), Polypropylene, Kynar ® (PVDF) WETTED PARTS: CHECKS: Stainless Steel, Santoprene® , Buna N, Viton® , Teflon ® , EPR, Neoprene, Polyurethane CHECK SEATS: Polypropylene, Kynar, Acetal, Stainless Steel DIAPHRAGMS: Santoprene, Neoprene, Teflon, Viton, Hytrel, EPR, Buna N Kalrez(R) and Viton(R) are registered trademarks of DuPont Dow Elastomers
	Metallic Constructed Pumps
	PUMP MATERIAL CHOICES (Note: Not all pump models contain every material listed. Consult I-R/ARO or Catalog for specific trimmings.)
BODY: Aluminum, Cast Iron , Stainless Steel WETTED PARTS: CHECKS: Neoprene, Buna N, Viton, Geolast ® , Santoprene, Teflon, EPR, Acetal, Polyurethane, Stainless Steel CHECK SEATS: Stainless Steel, Polypropylene, Kynar (PVDF), 316 and 400 Stainless Steel, Santoprene, Geolast, Hard 440 S.S. DIAPHRAGMS: Neoprene, Buna N, Viton, Teflon, EPR, Hytrel, Santoprene, Geolast Kalrez(R) and Viton(R) are registered trademarks of DuPont Dow Elastomers
	Specialty Pumps
	2" PORTS, "FLAP" VALVE PUMP Capable of passing abrasive slurries and other pipe-sized particles, the ARO Flap Valve Diaphragm Pump is the ideal process pump. Flow: 160 GPM (Max.) PUMP MATERIALS: BODY: Aluminum, Stainless Steel, Cast Iron FLAP CHECKS: Santoprene, Geolast CHECK SEATS: 316 Stainless Steel DIAPHRAGM: Santoprene, Geolast
1" PORTS, 3:1 RATIO, HIGH-PRESSURE PUMP For paint recirculation or any process where sustained, high transfer pressures are required, the ARO 3:1 pump is the no-stall solution. Flow: 24 GPM (Max.) Operating Pressure: 300 PSI (Max.) PUMP MATERIALS: BODY: Aluminum, Stainless Steel CHECKS: Stainless Steel CHECK SEATS: Stainless Steel DIAPHRAGMS: Teflon

U.L. LISTED, FUEL TRANSFER PUMPS